Products
Paste Materials
Modeling Boards
Laminating Resins
Surface Coats
Casting Epoxy
Casting Urethanes
Prototyping Materials
Silicones
Urethane Elastomers
Adhesives
Accessories
Third party Products
Chavant Products
Kindt-Collins Products
Rook/Michaels Eng.
Services
Special Formulations
Toll Manufacturing
Distribution
North America
Eastern Region
Central Region
Western Region
Technical Library
Video/Flyer Library
Data Sheets

Epoxy Clay Materials
Laminating Resins
Surface Coats
Casting Epoxy
Epoxy Adhesives
Polysulfide Rubbers
Foundry Pattern Adhesives and Sealers
|
Adhesive Systems
The BCC Products has several adhesive materials available. From a general purpose epoxy
adhesive in DP-11-88 to a red board adhesive in the DP-11-75. We also have excellent
results with our laminating BC5003 and BC5008 in bonding our modeling and tooling boards.

BC5009 Epoxy Adhesive and Laminating Resin
BC5009 is a very low viscosity, modified, unfilled, room temperature curing, general purpose
resin system.
BC5009 is a clear-amber epoxy adhesive especially formulated for the bonding of wood
and urethane model board. It may be also used as a laminating resin. The resin is color indicated
(green) and will turn to a clear amber color as the hardener is mixed into the resin. This indicator
system promotes fast and efficient mixing of the resin and hardener, insuring that they are
thoroughly mixed yet wasting no time over mixing.
Features:
Mix ratio: 100:25 by wt.
Pot life: 30 minutes
Viscosity (Mixed)@ 75F: 2,100cps
Cure schedule: 16 hours
Color: Translucent Amber
Hardeness (shore D): 80
HDT (°F): 160
Tech Datasheet
Return to Top
 
BC100 Cyanoacrylate Adhesives
BCC Products, Inc/Blehm Plastics is proud to announce the addition of the specialty chemistry of
Cyanoacrylate Adhesives to our quality product line. The BC100 families of cyanoacrylates offer
fast cure speeds and are formulated to bond those hard to bond surfaces with dependable strength.
The BC100 adhesive comes in three formulas BC100 Thin, BC100 Medium and BC100 Thick. All perform to
the exacting standards that all BCC Products are known for. All our Cyanoacrylate Adhesives currently
come in 1oz and 2oz bottles, other sizes are available by request.
|
BC100 Thin
BC100 Thin is a low viscosity material ideal for bonding larger areas. BC100 Thin has a 20 second
fixture cure and able to fill gaps of .002” wide. BC100 Thin is perfectly designed for bonding
plastic parts and other substrates like Stainless Steel, Neoprene and ABS and even Nitrile Rubber.
Features:
Gap Filling: 0.05mm
Bonding Time: 20 seconds
Glass Transistion (°F): 248
Tensile Shear Strength: 15-26 n/mm²
Shear Strength: See TDS
Datasheet
BC100 Medium
BC100 Medium, like its name in the medium viscosity version of cyanoacrylate adhesive that
has become most popular in the super bonding applications. A 12 second fixture bond makes the
BC100 the fastest in our family of cyanoacrylates. Excellent for bonding rough and porous
surfaces BC100 meets Military specification MLLA 46050 Type II Class II. Perfect for
industrial manufacturing and repair applications, you can bond with speed.
Features:
Gap Filling: 0.2mm
Bonding Time: 12 seconds
Glass Transistion (°F): 251
Tensile Shear Strength: 18-26 n/mm²
Shear Strength: See TDS
Datasheet
|
|
BC100 Thick
BC100 Thick is the slow and thickest member of the BCC Products line of cyanoacrylate adhesive.
Excellent for gap filling the BC100 Thick has a 30 second fixture time allowing for the material
to fill voids and bonding areas. Bonds well to a variety of substrates and materials, formulated
especially to plastics, metals and elastomers. Perfect for bonding rough and irregular surfaces and
applications requiring up to 15 seconds of alignment and work time.
Features:
Gap Filling: 0.45mm
Bonding Time: 30 seconds
Glass Transistion (°F): 257
Tensile Shear Strength: 15-22 n/mm²
Shear Strength: See TDS
Datasheet

BC100 Anciliaries
The BC100 Cyanoacrylate Adhesive Family also has a De-Bonding agent which will remove
the bonds of the three versions of our adhesive; Thin, Medium and Thick. BC100 family also has a
Accelerator for quickening the bond when sprayed. So with a complete line of Cyanoacrylate
Adhesive and Acilliaries you can’t go wrong with BCC Products, Inc/Blehm Plastics and our BC100 product family.
|
 
BC110 Polyurethane 1-2 minute Superfast Adhesive
BC110 is a two-component, 1-2 minute very fast setting, room
temperature cure polyurethane adhesive system.
This sandable adhesive system has an excellent adhesion
to wide variety of surfaces.
Features:
• Fast setting time with convenient 1:1 mix ratio
• Excellent adhesion to wide variety of surfaces such as
Aluminum, Stainless steel, ABS, PVC, Polyurethane,
Composites, Thermoplastics, Thermosetting Plastics,
Wood, Glass, Concrete without any use of primer.
Specs:
Color: Black
Viscosity @ 250C: 30,000
Weight per Gallon: 11
Mix Ratio by Volume: 100:100
Mix Ratio by Weight: 100:100
Working Time: 60 – 100 seconds
Fixture Time: 10 – 14 Minutes
Functional Cure: 2 hours
Full Cure: 24 hours
Service Temperature:
-400°F to 250°F
Coverage per lb:
94 sq. inch per lb @ 1/4”
Tech Datasheet
Return to Top
 
BC150 Polyurethane 5-15 minute Superfast Adhesive
BC150 is a two-component, 5-15 minute fast setting, room
temperature cure structural polyurethane adhesive system.
This sandable adhesive system has an excellent adhesion
to wide variety of surfaces.
Features:
• Fast setting time with convenient 1:1 mix ratio
• Excellent adhesion to wide variety of surfaces such as
Aluminum, Stainless steel, ABS, PVC, Polyurethane,
Composites, Thermoplastics, Thermosetting Plastics,
Wood, Glass, Concrete without any use of primer..
Specs:
Color: Gray
Viscosity @ 250C: 30,000
Weight per Gallon: 11
Mix Ratio by Volume: 100:100
Mix Ratio by Weight: 100:100
Working Time: 5 -15 Minutes
Fixture Time: 20 Minutes
Functional Cure: 2 Hours
Full Cure: 24 hours
Service Temperature:
-400°F to 250°F
Coverage per lb.:
94 sq. inch per lb @ ¼”
Tech Datasheet
Return to Top
BC5003
BC 5003 is a medium viscosity, unfilled laminating system. It is a room
temperature curing resin with a relatively short pot life. BC 5003 is also
considered an excellent general purpose adhesive for in-shop use. Recommended
for use in gluing up BCC’s Tooling Board Series.
Features:
Mix ratio: 100:20 by wt.
Mix ratio: 100:22 by vol.
Pot life: 14-15 minutes
Viscosity (Mixed)@ 75F: 3,500cps
Cure schedule: 6-8 hours
Color: Amber or Red
Tech Datasheet
Return to Top
BC5105
BC 5105 is a clear, unfilled, low viscosity laminating system. This heat
resistant resin exhibits excellent wet out, reasonable working time and may
be used at room temperature without post-curing. For use above 150ºF a
post-cure may be required. BC 5105 can afford consistent use to 300ºF if
required.
Does not contain VCHD or MDA. Useful for:
*Constructing vacuum form tools
*Injection and compression molds
*RTM and RIM molds
*Matched dies
Features:
Mix ratio: 100:17 by wt.
Mix ratio: 100:20 by vol.
Pot life: 55 minutes
Viscosity (Mixed)@ 75F: 2,000cps
Cure schedule: 8-12 hours
Color: Clear
Tech Datasheet
Return to Top
BC5200 Laminating Adhesive
BC5200 is a medium viscosity fast gelling two part Epoxy Adhesive System.
With an easy to use 1 to 1 mix ratio, BC5200 is considered an excellent general
purpose adhesive for in-shop use. BC5200 will bond to wood, concrete, select
plastics and most metal surfaces.
Features:
Mix ratio: 100:100 by wt.
Mix ratio: 100:100 by vol.
Pot life: 4-4.5 minutes
Viscosity (Mixed)@ 75F: 13,000cps
Cure schedule: 60 hours
Color: Clear
Tech Datasheet
Return to Top
DP-11-75 Foundry Plank Repair paste
DP-11-75 is a two component medium viscosity urethane patch system. A hybrid
product which was designed specifically for making quick responsive
repairs/buildups to the MB 4000 Foundry Plank. DP-11-75 is exceptionally
tough, highly machinable after cure, and exhibits superior properties
similar to MB 4000.
Specifications:
Mix ratio: 1:1
Viscosity (Mixed): 1,600cps
Pot Life: 1.5 minutes
Cure time: 20-30 minutes
Color: Red
Packaging: 50ml tubes
Tech Datasheet
Return to Top
DP-11-83 20lb. Urethane Adhesive Slo
DP-11-83 is a low viscosity, quick setting, easy to use adhesive
and/or casting material. This product was designed to bond together
the obomodulan 302 foam board to create desired dimensions in length,
width and height. DP-11-83 has a working life of up to 13 minutes for
casting applications. If used as an adhesive, it is workable for up
to 16 minutes.
Specifications:
Mix ratio: 1:1
Viscosity (Mixed): 2,200cps
Pot Life: 14-16 minutes
Cure time: 6-8 hours
Color: Pink
Tech Datasheet
Return to Top
DP-11-88 Urethane Adhesive
DP-11-88 is a medium viscosity quick setting easy to use urethane adhesive.
This system was specifically designed to bond together the MB3000 Model/Tooling
Board to create desired dimensions in length, width, and height. DP-11-88 offers
a working life of 10 to 12 minutes in 1/4 pound mass, and 20 + minutes in
a 1/16 inch film.
Specifications:
Mix ratio: 1:1
Viscosity (Mixed): 3,750cps
Hardness: 62D
Working time: 10-12 minutes
Gel time: 12-14 minutes
Tech Datasheet
Return to Top
BCC Products
BCC Products takes the time to produce the products that you ask for. By working directly
with our customers we have been able to develop some of the best products to meet all your
needs.
Specializing in formulated resin systems, custom processing of raw materials, our house team
can deliver products you require.
|
|
|
"mold making, silicone rubber, casting resin, moldmaking, rubber mold materials, casting plastic, liquid urethane, epoxy, wax, platinum based, tin-cured, modeling, toolmaking, foundry supplies, encapulating polyurethanes, potting compounds, silicon moulds, gel coat, filled fastcast, nesting assembly fixture, architectural restoration, taxidermy"
|