|
|||
|
Home | Products | News | Contact | How To | Site Map | Toll free orderline: 800-556-0067 |
|||
|
|
|||
Products
Paste Materials Third party Products Services
Special Formulations DistributionNorth America Technical Library
Video/Flyer Library 
Epoxy Clay Materials 
BC100 Cyanoacrylate Adhesives BCC Products, Inc/Blehm Plastics is proud to announce the addition of the specialty chemistry of
Cyanoacrylate Adhesives to our quality product line. The BC100 families of cyanoacrylates offer
fast cure speeds and are formulated to bond those hard to bond surfaces with dependable strength.
The BC100 adhesive comes in three formulas BC100 Thin, BC100 Medium and BC100 Thick. All perform to
the exacting standards that all BCC Products are known for. All our Cyanoacrylate Adhesives currently
come in 1oz and 2oz bottles, other sizes are available by request. |
Casting Epoxy
Our casting epoxies are proven technology in the area of mass casting tools and molds.
BCC Product epoxies can be casted as thin as 1/8" or as thick as 6" with some products.
These products were exxpertly formulated to reduce shrinkage and have excellent
reproductive detail qualities.
BC7009-1 BC 7009-1 is an iron filled, low-cost mass casting system.
Thicknesses up to two inches in non-conductive molds, and four
inches in conductive molds can be achieved without foaming or yielding
excessive shrinkage. Ideal for stretch forms, patterns, dies, molds,
duplications, prototypes, etc. Return to Top BC7009-2 BC 7009-2 is an iron oxide filled, low-cost mass casting system. Recommended
for use in casting a minimum of two inches and a maximum of six inches in
non-conductive molds. Thicknesses to nine inches in metal or conductive-type
molds can successfully be achieved as well. Ideal for stretch forms, patterns,
dies, molds, duplications, prototypes, etc.. Return to Top 
BC7020 Backfill System BC 7020 is a lightweight two component epoxy backfill system. Unlike
BC 7010, the filler portion is pre-blended into the resin and hardener
components for easier handling, thus simplifying the mixing process.
BC 7020 is ideally suited for foundry applications involving mold and core
construction. Return to Top HPX-850 Backfill System HPX-850 is a light weight, heat resistant, two component epoxy backfill
system. Like BC 7020, the filler portion is pre-blended into the resin and
hardener components for easier handling, thus simplifying the mixing process.
HPX-850 features advantages such as low cost, long pot life, machineability,
and low shrinkage. HPX-850 is ideally suited for numerous applications
involving mold and core construction. Return to Top BC7053 BC 7053 is an iron filled epoxy casting system. This system is a high
iron content material that provides unsurpassed wear resistance. BC7053
was designed for use in constructing core boxes, holding and trimming
fixtures, foundry patterns, etc. Return to Top 
BC7062/BC7062-1 BC 7062 are aluminum filled, low viscosity epoxy mass casting resins.
These room temperature cure systems allow the user choice thicknesses of 1/8
inch to a maximum of 3/4 inches without foaming or yielding excessive shrinkage.
Casting thicknesses may be increased by incorporating aluminum needles, puffs
or granules. BC 7062, when properly cured, provides nearly perfect
reproduction, resulting in a dimensionally stable, hard, tough surface.
For use in constructing duplicate models, prototypes, patterns, facing dies, etc. Return to Top BC7062/BC7062-2 BC 7062-2 System is very similar to the BC 7062-1 both are aluminum filled,
low viscosity epoxy mass casting resins.
These room temperature cure systems allow the user choice thicknesses of 1/8
inch to a maximum of 2 inches without foaming or yielding excessive shrinkage.
Casting thicknesses may be increased by incorporating aluminum needles, puffs
or granules. BC 7062, when properly cured, provides nearly perfect
reproduction, resulting in a dimensionally stable, hard, tough surface.
For use in constructing duplicate models, prototypes, patterns, facing dies, etc. Return to Top BC7062/BC7062-3 BC 7062-3 System is very similar to the BC 7062-1 & BC 7062-2, all
are aluminum filled, low viscosity epoxy mass casting resins.
These room temperature cure systems allow the user thicknesses maximum of 6
inches without foaming or yielding excessive shrinkage.
Casting thicknesses may be increased by incorporating aluminum needles, puffs
or granules. BC 7062, when properly cured, provides nearly perfect
reproduction, resulting in a dimensionally stable, hard, tough surface.
For use in constructing duplicate models, prototypes, patterns, facing dies, etc. Return to Top 
BC7136 BC7136 is a gray, low toxicity, aluminum filled, epoxy casting resin. This
heat resistant system may be used at room temperature without post-curing.
May be cast to a thickness of ¾ inch in non-conductive molds. For use above
150ºF a post-cure is required. This product was engineered to replace VCHD
and MDA systems while retaining excellent heat resistance and low viscosity. Return to Top BC7136/BC7136-2H BC7136-2 is an aluminum filled thick section casting system with heat
resistance to 300ºF. May be cast to a thickness of 2 inches in non-conductive
molds, 3 inches in conductive molds and thicker sections with the addition of
bulk fill. For service temperature above 150ºF a post-cure is required.
Does not contain VCHD or MDA. See cure schedule. Return to Top BCC Products
BCC Products takes the time to produce the products that you ask for. By working directly
with our customers we have been able to develop some of the best products to meet all your
needs. |
 |
|
|
Copyright BCC Products, Inc. 2008 Order-Line:800-556-0067 • www.bccproducts.com |
|||
| "mold making, silicone rubber, casting resin, moldmaking, rubber mold materials, casting plastic, liquid urethane, epoxy, wax, platinum based, tin-cured, modeling, toolmaking, foundry supplies, encapulating polyurethanes, potting compounds, silicon moulds, gel coat, filled fastcast, nesting assembly fixture, architectural restoration, taxidermy" | |||