Paste Materials
Modeling Boards
Laminating Resins
Surface Coats
Casting Epoxy
Casting Urethanes
Prototyping Materials
Silicones
Urethane Elastomers
Adhesives
Accessories

Services

Special Formulations
Toll Manufacturing

Distribution

North America
Eastern Region
Central Region
Western Region

Technical Library

Video/Flyer Library
Data Sheets

Epoxy Clay Materials
Laminating Resins
Surface Coats
Casting Epoxy
Epoxy Adhesives
Polysulfide Rubbers
Foundry Pattern Adhesives and Sealers

BC4570
High Heat Filler

A multi-purpose two part filler paste developed for making quick repairs to a variety of substrates where service temperature exceeds 400°F (204°C). It exhibits good adhesion to SMC, FRP, hi-heat Epoxy molds, many metals, etc. BC 4570 can be readily shaped by filing, grinding or machining after cure. Excellent for under the waterline repairs and fairing compound applications

Features:
Mix ratio: 100:2
Pot life: 6-8 minutes
Viscosity: Thixotropic Paste
Cure schedule: 15-20 minutes
Heat distortion Temp: 260°F (127°C)
Approvals: XBMS 5-136

Epoxy Laminating Resins Systems

The BCC Products line of epoxy laminating resins were built from years of experience with customers. We have developed products room-temperature and high-temperature resins for parts and tools.

BC 5003 is a medium viscosity, unfilled laminating system. It is a room temperature curing resin with a relatively short pot life. BC 5003 is also considered an excellent general purpose adhesive for in-shop use. Recommended for use in gluing up BCC’s Tooling Board Series.

Features:
Mix ratio: 100:20 by wt.
Mix ratio: 100:22 by vol.
Pot life: 14-15 minutes
Viscosity (Mixed)@ 75F: 3,500cps
Cure schedule: 6-8 hours
Color: Amber or Red
Tech Datasheet

BC 5008-2 is a very low viscosity, modified, unfilled, room temperature curing, general purpose resin system. BC 5008-2 is a clear, amber, medium pot life material, with heat resistance to 175°F. BC 5008 is considered an excellent general purpose adhesive for in-shop use and will function as a laminating system for horizontal surfaces.

Features:
Mix ratio: 100:25 by wt.
Mix ratio: 100:26 by vol.
Pot life: 25-30 minutes
Viscosity (Mixed)@ 75F: 500cps
Cure schedule: 8-12 hours
Color: Clear Amber
Tech Datasheet

BC 5010 is a high quality, low viscosity room temperature curing laminating resin. A Safety System for the production of a variety of dimensionally stable fiberglass tools. BC 5010 features low odor and rapid “wet-out” with no vertical drain off. An excellent general purpose laminating resin to meet the tooling requirements for automotive, aircraft and foundry.

Features:
Mix ratio: 6:1 by wt.
Mix ratio: 4.5:1 by vol.
Pot life: 25-30 minutes
Viscosity (Mixed)@ 75F: 3,200cps
Cure schedule: 8-12 hours
Color: White or Blue
Tech Datasheet

BC 5105 is a clear, unfilled, low viscosity laminating system. This heat resistant resin exhibits excellent wet out, reasonable working time and may be used at room temperature without post-curing. For use above 150°F a post-cure may be required. BC 5105 can afford consistent use to 300°F if required.

Does not contain VCHD or MDA. Useful for:
*Constructing vacuum form tools
*Injection and compression molds
*RTM and RIM molds
*Matched dies

Features:
Mix ratio: 100:17 by wt.
Mix ratio: 100:20 by vol.
Pot life: 55 minutes
Viscosity (Mixed)@ 75F: 2,000cps
Cure schedule: 16-24 hours
Color: Clear
Tech Datasheet

BC 5114 is a gray low viscosity laminating system. This heat resistant resin exhibits excellent wet out, reasonable working time and may be used at room temperature without post-curing. For use above 150°F a post-cure is required. BC 5114 can afford consistent use to 300°F if required. Does not contain VCHD or MDA. Same uses as with BC 5105. See cure schedule.

Features:
Mix ratio: 100:13 by wt.
Mix ratio: 100:18 by vol.
Pot life: 60 minutes
Viscosity (Mixed)@ 75F: 3,600cps
Cure schedule: 24 hours
Color: Gray
Tech Datasheet

BE 290 is a low viscosity, medium pot life, room temperature laminating system. BE 290 features low odor, reduced toxicity and adequate working life for constructing medium and large fabricated tools.

Features:
Mix ratio: 3:1 by wt.
Mix ratio: 2.5:1 by vol.
Pot life: 65-70 minutes
Viscosity (Mixed)@ 75F: 2,700cps
Cure schedule: 24 hours
Color: Green
Tech Datasheet

BCC Products

BCC Products takes the time to produce the products that you ask for. By working directly with our customers we have been able to develop some of the best products to meet all your needs.
Specializing in formulated resin systems, custom processing of raw materials, our house team can deliver products you require.

The BC8160 prototyping resin is a impact, abrasion resistant polyurethane resin that can be used in all types of designs and models. BC8160 has a high memory when casted into shapes and can return to those shapes with exacting results. Built for designers and prototypes that require a “living hinge” type of material BC8160 is their ideal choice.

Some of the outstanding features include:
*Non-sensitive to moisture after cure
*Tintable
*Moderate heat resistance
*Excellent memory
*Living Hinge style of material

Features:
Mix ratio: 100:60 by wt.
Pot life: 18 minutes
Viscosity (Mixed) 1,400-1,500cps
Demold time: 6-8 hours*
Hardness (shore): 62D +2
Color: Available in Light Amber
*faster demold can be achieved with preheated mold, see technical data sheet
Tech Datasheet