Products

Paste Materials
Modeling Boards
Laminating Resins
Surface Coats
Casting Epoxy
Casting Urethanes
Prototyping Materials
Silicones
Urethane Elastomers
Adhesives
Accessories

Third party Products
Chavant Products
Kindt-Collins Products
Rook/Michaels Eng.

Services

Special Formulations
Toll Manufacturing

Distribution

North America
Eastern Region
Central Region
Western Region

Technical Library

Video/Flyer Library
Data Sheets

Epoxy Clay Materials
Laminating Resins
Surface Coats
Casting Epoxy
Epoxy Adhesives
Polysulfide Rubbers
Foundry Pattern Adhesives and Sealers

BCC Products, Inc/Blehm Plastics is proud to announce the addition of the specialty chemistry of Cyanoacrylate Adhesives to our quality product line. The BC100 families of cyanoacrylates offer fast cure speeds and are formulated to bond those hard to bond surfaces with dependable strength. The BC100 adhesive comes in three formulas BC100 Thin, BC100 Medium and BC100 Thick. All perform to the exacting standards that all BCC Products are known for. All our Cyanoacrylate Adhesives currently come in 1oz and 2oz bottles, other sizes are available by request.

BCC Modeling and Tooling Planks

BCC has been involved in making tooling boards for over 10 years. Unlike those other guys making NC boards we listened to our customers not the competitors. Our boards were developed with the user in mind. High quality, easy NC cutting, excellent finished aspect give our boards a determinant advantage. If you're using a urethane board, your should be using BCC Products.

Click the board you would like to get more information on:

“325°F Epoxy Board”
BCC Products, Inc/Blehm Plastics announces their newest tooling board for the composites industries. BCC Products, Inc/Blehm Plastics have just developed their EB6200 a high-temperature epoxy tooling board. Built to the exacting standards of all BCC Products, Inc/Blehm Plastics product line the new EB6200 high-temperature tooling board is ideal for those using prepreg in construction of tools for composite parts. After extensive testing the EB6200 has shown that e ven at the temperature range of 325oF the board shows little effects.

Available in 2, 4, 6”x 24”x60” dimensions the EB6200 has been developed to fit the need of those in the aerospace, motorsport and automotive industries. The material has excellent aspect and cutting performance and shaves and creates little dust to save on cutting tools and clean-up after cutting.

The EB6200 has a shore hardness of 72D and a density in the 47lb/ft3 it is becoming the favorite among epoxy board users. BCC Products, Inc/Blehm Plastics has been a leader in innovative and performance products for over a combined 80 years and the EB6200 is no exception.

Features:
Density(lbs/ft3; gms/cm3): 47/0.76
Hardness: 72D
Heat Distortion (°F): 300
Glass transition (Tg °F): >325
CTE (in/in/°F): 2.1x10-5
Color: Brown
Sizes:
2",4",6"x24"x60"

Tech Datasheet
EB6200 Product Flyer

“Olive/Grey”
MB 1100 is an Olive colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1100 is low density foam of approximately 10lbs/ft3 board. Easily cut using CNC machining equipment or by hand the MB 1100 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

MB1100 has these great qualities:
* Easily machined or hand carved
* Very little abrasion
* No shrinkage
* Excellent at high speed cutting
* Excellent surface finish
* Exceptional dimensional stability

Features:
Density (lbs/ft3): 10
Hardness (Shore D): 20
Tensile Strength (psi): 350
Flexural Strength (psi): 380
Service Temp. (min/max): -300/+195
Compressive Strength (psi): 280
CTE (in./in./°F): 33 x 10-6
Sizes:
2",4",6",8"x24",48"x96"
Tech Datasheet
Foam Product Flyer

“Avacado”
MB 1150 is an Avocado colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1150 is low density foam of approximately 15lbs/ft3 board. Easily cut using CNC machining equipment or by hand the MB 1150 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

MB1150 has these great qualities:
* Easily machined or hand carved
* Very little abrasion
* No shrinkage
* Excellent at high speed cutting
* Excellent surface finish
* Exceptional dimensional stability

Features:
Density (lbs/ft3): 15
Hardness (Shore D): 30
Tensile Strength (psi): 600
Flexural Strength (psi): 780
Service Temp (min/max): -300/+195
Compressive Strength: 560-590
CTE (in./in./°F): 33 x 10-6
Sizes:
2",4",6",8"x24",48"x96"
Tech Datasheet
Foam Product Flyer

Available in “Apricot or Pink"
MB 1200 is an rigid closed-cell polyurethane foam tooling and modeling board. MB 1200 is low density foam of approximately 20lbs/ft3 board. Easily cut using CNC machining equipment or by hand the MB 1200 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

MB1200 has these great qualities:
* Easily machined or hand carved
* Very little abrasion
* No shrinkage
* Excellent at high speed cutting
* Excellent surface finish
* Exceptional dimensional stability

Features:
Density (lbs/ft3): 20
Hardness (Shore D): 40
Tensile Strength (psi): 895
Flexural Strength (psi): 1,330
Service Temp (min/max): -300/+195
Compressive Strength: 1,140-1,130
CTE (in./in./°F): 33 x 10-6
Adhesive: DP-11-83
Sizes:
2",4",6",8"x24",48"x96"
Color in photos may not represent the actual color of boards.
Tech Datasheet
Foam Product Flyer

“Mahogany”
MB 1300 is a Mahogany colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1300 is medium low density foam of approximately 30lbs/ft3 board. Easily cut using CNC machining equipment the MB 1300 is perfectly suited for visual master models, architectural design models as well as design verification and prototype tools.

MB1300 has these great qualities:
* Excellent machinability
* Very little abrasion
* No shrinkage
* Excellent at high speed cutting
* Excellent surface finish
* Exceptional dimensional stability

Features:
Density (lbs/ft3): 31
Hardness (Shore D): 58
Tensile Strength (psi): 1,250
Flexural Strength (psi): 2,400
Service Temp (min/max): -300/+195
Compressive Strength: 2,200
CTE (in./in./°F): 33 x 10-6
Color: Mahogany
Adhesive: Dp-11-88
Repair: BC4578
Sizes:
2",4",x24"x60"
Tech Datasheet
Foam Product Flyer

Model and Tooling Plank MB 3000 is a dense, highly machineable, dimensionally stable tooling plank for today's CNC machining applications. As an advancement over similar products on the market, MB 3000 yields low dust emission during machining, less abrasiveness to CNC cutters, and affords the user a highly defined surface finish.

MB3000 has these great qualities:
* Excellent machinability
* Low dust emission
* No shrinkage
* Low moisture absorption
* No grain
* Excellent surface finish

Features:
Density(lbs/ft3; gms/cm3): 45/72
Hardness: 65D
Tg (°F): 208
Compressive strength: 4,440
CTE (in/in/°F): 58.21x10-6
Color: Mahogany (Brown)
Adhesive: DP-11-88
Repair: BC4578
Sizes:
2"-4"x16"x60"
1"-4"x24"x60"
Tech Datasheet
MB3000 Product Flyer

BCC Products now offers a revolutionary state-of-the-art machinable fixture plank for today's demanding tooling requirements. MB 3500 is an extremely tough, high impact Urethane Plank, that can replace aluminum and other metals for many foundry applications.

MB3500 has these great qualities:
* Excellent machinability
* Low dust emission, mostly shavings
* No shrinkage
* Excellent impact and wear resistance
* Excellent surface detail reproduction
* Excellent surface finish

Features:
Density(lbs/ft3; gms/cm3): 48/77
Hardness: 73D
Tg (°F): 215
Heat Distortion (°F): 200
CTE (in/in/°F): 29.00x10-6
Color: Lt. Gray
Adhesive: BC5003 Clear
Repair: BC4570
Sizes:
2"-4"x16"x60"
1"-6"x24"x60"
Tech Datasheet
MB3500 Product Flyer

BCC Products now offers a revolutionary state-of-the-art machineable foundry plank for today's demanding tooling requirements. MB4000 Red is an extremely tough, high impact Urethane Plank, that can replace aluminum and other metals for many foundry applications.

MB4000 has these great qualities:
* Excellent machinability
* Low dust emission, mostly shavings
* No shrinkage
* Excellent impact and wear resistance
* Excellent surface detail reproduction
* Excellent surface finish
* Polishable to a high gloss

Features:
Density(lbs/ft3; gms/cm3): 71/1.14
Hardness: 86D
Tg (°F): 240
Heat Distortion (°F): 214
CTE (in/in/°F): 35.60x10-6
Color:Red
Adhesive: BC5003 Red
Repair: DP-11-75
Sizes:
2"-4"x16"x60"
1"-6"x24"x60"
Tech Datasheet
MB4000 Product Flyer

BCC Products now offers a revolutionary state-of-the-art machineable high density board for today's demanding tooling requirements. MB 5000 is an extremely tough, high impact Urethane Plank, that can be used for metal forming as well as nickel plating mandrels.

MB5000 has these great qualities:
* Excellent machinability
* Low dust emission, mostly shavings
* No shrinkage
* Excellent impact and wear resistance
* Excellent surface detail reproduction
* Excellent surface finish

Features:
Density(lbs/ft3; gms/cm3): 100/1.6
Hardness: 88D +2
Heat Distortion (°F): 195
Tg (°F): 215
CTE (in/in/°F): 2.29x10-5
Color:White
Adhesive: BC5003 Clear
Sizes:
2"-4"x16"x60"
2"-3"x24"x60"
Tech Datasheet
MB5000 Product Flyer

BCC Products now offers a truly metal-like machineable modeling plank for today's demanding applications. MB 8250 is an aluminum filled product that is dimensionally stable and exhibits unsurpassed machinable properties. With the BC 8250 tooling plank you can see in some applications a significant savings on billet aluminum tooling materials.

MB8250 has these great qualities:
* Excellent machineability
* Low dust emission
* No shrinkage
* Low moisture absorption
* Excellent surface detail reproduction
* Excellent surface finish

Features:
Density(lbs/ft3; gms/cm3): 99.84/1.60
Hardness: 85D
Heat Distortion (°F): 175
CTE (in/in/°F): 39.239x10-6
Color:Dark Gray
Adhesive: BC5003 Clear
Sizes:
2",3"x16"x60"
Tech Datasheet
MB8250 Product Flyer

BCC Products

BCC Products takes the time to produce the products that you ask for. By working directly with our customers we have been able to develop some of the best products to meet all your needs.
Specializing in formulated resin systems, custom processing of raw materials, our house team can deliver products you require.

After several requests for our top quality tooling boards in a round format we have developed our boards in a 20” round size.

Perfect for foundry applications the new MB4000 round is great for man-hole covers and automotive wheel patterns. Our newest MB 3000 in round is one of the best round modeling and tooling boards you’ll find.

Both our rounds are built to BCC Products/Blehm Plastics exacting standards and quality of our standard planks.

Round Tooling Board Flyer