Paste Materials
Modeling Boards
Laminating Resins
Surface Coats
Casting Epoxy
Casting Urethanes
Prototyping Materials
Silicones
Urethane Elastomers
Adhesives
Accessories

Services

Special Formulations
Toll Manufacturing

Distribution

North America
Eastern Region
Central Region
Western Region

Technical Library

Video/Flyer Library
Data Sheets

Epoxy Clay Materials
Laminating Resins
Surface Coats
Casting Epoxy
Epoxy Adhesives
Polysulfide Rubbers
Foundry Pattern Adhesives and Sealers

BC4570
High Heat Filler

A multi-purpose two part filler paste developed for making quick repairs to a variety of substrates where service temperature exceeds 400°F (204°C). It exhibits good adhesion to SMC, FRP, hi-heat Epoxy molds, many metals, etc. BC 4570 can be readily shaped by filing, grinding or machining after cure. Excellent for under the waterline repairs and fairing compound applications

Features:
Mix ratio: 100:2
Pot life: 6-8 minutes
Viscosity: Thixotropic Paste
Cure schedule: 15-20 minutes
Heat distortion Temp: 260°F (127°C)
Approvals: XBMS 5-136

Surface coats

BCC Products surface coats are developed with the high-performance and the quality you have come to rely on from BCC. Our surface coats are excellent for coating everthing from freshly poured plaster to high-temperature and abrasion resistance. Why look further for surface coats when BCC products has what you need and when.

BC 6004 is a white thixotropic epoxy surface coat that has the ability to cure and bond to freshly poured wet plaster. This formulated resin compound can be applied with a brush or troweled to a thickness of 1/8” or less on vertical surfaces or over sharp radii without sag or fear of run-off. BC 6004 features moderate heat resistance and tracing hardness.

Features:
Mix ratio: 12:1 by wt.
Mix ratio: 7:1 by vol.
Pot life: 15-20 minutes
Viscosity (Mixed)@ 75F: Thixotropic paste
Cure schedule: 8-12 hour
Color: White
Tech Datasheet

BC 6005 is a snow white thixotropic epoxy resin designed specifically for quality reproduction of a variety of surfaces. A room temperature cure system that offers ample working time yet affords quick-tack for lamination. BC 6005 may be applied easily with a brush or troweled to a thickness of 1/8” or less on vertical surfaces or over sharp radii without sag or fear of run-off. When cured, this resin system provides a hard tough chip-resistant surface.

Features:
Mix ratio: 6:1 by wt.
Mix ratio: 4:1 by vol.
Pot life: 18-22 minutes
Viscosity (Mixed)at 77F: Thixotropic
Cure schedule: 8-12 hours
Color: White
Tech Datasheet

BC 6060 is a blue epoxy, abrasion resistant surfacing resin. Commonly referred to as “die surface” material, this system may be applied by brush or if preferred, cast in thin sections to a maximum of ½”. Ideally suited for a variety of applications, BC 6060 is recommended for dies, foundry pattern and core boxes, router, trim and inspection fixtures.

Features:
Mix ratio: 100:9 by wt.
Mix ratio: 100:15 by vol.
Pot life: 30-35 minutes
Viscosity (Mixed)@ 77F: 25,000
Cure schedule: 12-16 hours
Color: Blue
Tech Datasheet

BC 6126 is a gray, low toxicity, aluminum filled, epoxy surface coat. This thixotropic resin system provides excellent surface duplication along with vertical coverage to 1/16 inch thickness. This heat resistant system may be used at room temperature without post-curing. For use above 150°F a post-cure is required. BC 6126 was engineered to replace VCHD and MDA systems while retaining excellent heat resistance. It is designed for consistent use up to 300°F.

BC 6126 was developed for:
* Constructing vacuum form tools
* RTM and RIM molds
* Compression and injection molds
* Matched dies

Features:
Mix ratio: 100:10 by wt.
Mix ratio: 100:15 by vol.
Pot life: 45 minutes
Viscosity (Mixed)@ 77F: Thixotropic paste
Cure schedule: See Tech Datasheet
Color: Gray
Tech Datasheet

BC 6128 is a black, non-staining, silicon carbide filled, “die surface” surfacing resin. This thixotropic resin system provides excellent surface duplication along with good vertical coverage. Extended mold life due to superior wear resistance and hardness are the major benefits derived from its use. This heat resistant system may be used at room temperature without post-curing. For use above 150º F a post-cure is required. BC6128 can afford consistent use to 300º F if required. Does not contain VCHD or MDA.

Designed for uses in:
*RTM and RIM molds
*Constructing vacuum form tools
*Injection and compression molds
*Matched dies

Features:
Mix ratio: 100:7 by wt.
Mix ratio: 100:13 by vol.
Pot life: 35-45 minutes
Viscosity (Mixed)@ 75F: Thixotropic paste
Cure schedule: See Tech Datasheet
Color: Black
Tech Datasheet

BC8880 is a two-part urethane gel coat which exhibits excellent handling characteristics and very low moisture sensitivity. Its characteristics include a high modulus and a high hardness. It is a brushable room temperature curing urethane, which finds many general purpose applications such as foundry patterns, cure box liners, and abrasion resistant pads and bumpers. It may also be used as a urethane adhesive.

Features:
Mix ratio: 100:60 by wt.
Pot life: 12-15 minutes
Viscosity (Mixed): Thixotropic
Demold time: 8-12 hours
Hardness (shore): 60D +3
Color: Available in Amber, Black or Red
Tech Datasheet

BC8880 is a two-part urethane gel coat which exhibits excellent handling characteristics and very low moisture sensitivity. Its characteristics include a high modulus and a high hardness. It is a brushable room temperature curing urethane, which finds many general purpose applications such as foundry patterns, cure box liners, and abrasion resistant pads and bumpers. It may also be used as a urethane adhesive.

Features:
Mix ratio: 100:60 by wt.
Pot life: 13 minutes
Viscosity (Mixed): Thixotropic
Demold time: 2-3 hours
Hardness (shore): 70D +2
Color: Available in Amber, Black or Red
Tech Datasheet

BCC Products

BCC Products takes the time to produce the products that you ask for. By working directly with our customers we have been able to develop some of the best products to meet all your needs.
Specializing in formulated resin systems, custom processing of raw materials, our house team can deliver products you require.

The BC8160 prototyping resin is a impact, abrasion resistant polyurethane resin that can be used in all types of designs and models. BC8160 has a high memory when casted into shapes and can return to those shapes with exacting results. Built for designers and prototypes that require a “living hinge” type of material BC8160 is their ideal choice.

Some of the outstanding features include:
*Non-sensitive to moisture after cure
*Tintable
*Moderate heat resistance
*Excellent memory
*Living Hinge style of material

Features:
Mix ratio: 100:60 by wt.
Pot life: 18 minutes
Viscosity (Mixed) 1,400-1,500cps
Demold time: 6-8 hours*
Hardness (shore): 62D +2
Color: Available in Light Amber
*faster demold can be achieved with preheated mold, see technical data sheet
Tech Datasheet