Important updates regarding COVID-19

BC7062/BC7062-1 Casting Epoxy Systems

The BC7062 family of mass casting resins are aluminum filled, low viscosity epoxy. Without foaming or yielding excessive shrinkage, the BC7062-1 room-temperature cure system allows the user to choose thickness of 1/8 inch minimum to a maximum of 3/4 inches. Casting thicknesses may be increased by incorporating aluminum needles, puffs, or granules. BC 7062, when properly cured, provides nearly perfect reproduction, resulting in a hard, tough, dimensionally stable surface. It is used in constructing duplicate models, prototypes, patterns, facing dies, etc.

Product Features:

Mix ratio: 12:1 by wt.
Mix ratio: 6.5:1 by vol.
Pot life: 50 minutes
Viscosity (Mixed) @ 75F: 5,400 cps
Cure schedule: See Tech Datasheet
Casting thickness: 1/8″ – 3/4″
Color: Aluminum
Demold time (hours): 12–18 hours

Contact Us

This website and its content are copyright of BCC Products  | © BCC Products 2023. All rights reserved.

A Division of Polytek Development Corp.